Partial Rolls · United States
Every Bodaq Pattern, Cut to the Length You Need
Partial rolls of all 450+ Bodaq® interior film patterns by Hyundai L&C, for the cabinet run, the bank of doors or the reception front that will never use a 164 ft roll. Send the pattern codes and a length for each. We cut them, and if you want hands on site, the certified installer network is on bodaq.net.
- Samples first
- 48 in wide, cut to your length
- Cut and shipped in 1 to 2 days
- Certified installers via bodaq.net
01 Who It Is For
For Jobs Measured in Feet, Not Rolls
A full Bodaq roll is 48 in wide and 164 ft long: about 656 sq ft of film. Plenty of good work needs a fraction of that. One kitchen, a bank of doors, a single reception front. bodaq.us exists for those jobs.
Refinishing a kitchen or a run of doors? Order the feet the job takes, in the pattern the client picked, and skip the leftover roll in the van.
Request a Cut → 02Fabricators and Joinery ShopsWrap a batch of panels, a reception desk or a display unit in the exact code on the drawing, without holding stock of every pattern.
Work Out the Length → 03Designers and ArchitectsTest a finish on a real surface before a full installation, or specify a small feature in a pattern that has to match the scheme.
Samples First → 04Property ManagersRefresh a unit turnover, a lobby desk or an elevator cab one space at a time, ordered by pattern code, with a bodaq.net installer if you need one.
Need an Installer →
02 How Ordering Works
From Pattern Code to Cut Length in Five Steps
The same sequence for one vanity or a dozen doors. You choose the codes and the lengths; nothing is cut or charged until a person has confirmed the request with you.
Lead Time1 to 10 business daysCut and shipped in 1 to 2 days, as bodaq.com states it.
Search all 450+ by code, name or colour. The code on the swatch, like W375 or NS814, is what gets cut.
Screens flatten emboss and shift colour. Ask for the physical sample with your cut list before you commit to a length.
Film is 48 in wide; you choose the length. The calculator below turns surface sizes into linear feet.
Send the cut list. Price, stock and delivery are confirmed with you, then each pattern is cut from a full roll and shipped to your zip in 1 to 2 days.
Do small jobs yourself, or find a certified Bodaq installer through bodaq.net.
Length Calculator
How Many Feet Do I Need?
List the surfaces. Film is 48 in wide and the pattern runs along the roll, so each piece is measured in the direction you want the grain to run. Pieces wider than 48 in take an extra strip and a seam.
Add a surface to start.
The overage covers trimming and a spare edge. 10% is a starting point, not a Bodaq rule; your installer may ask for more.
Ordering Terms
Cut Lengths, at a Glance
- Lead time
- bodaq.com cuts and sends material in 1 to 2 days, with a lead time of 1 to 10 business days.
- Width
- 48 in (1,220 mm)The full roll width
- Length
- Cut to the length you order
- Minimum length
- 10 linear ftThe minimum bodaq.com states for part-roll orders.
- Price
- Quoted with your request
- Shipping
- Quoted with your request
- Need a full roll?
- 164 ft standard; 131 ft or 98 ft on some collectionsFull rolls for the trade: bodaqusa.com
03 The Catalogue
All 450+ Patterns, Cut to Order
Every current Bodaq pattern, by code. Add the ones you want to your cut list, or open any pattern for its page: the swatch, the details and what it is best for.
No pattern matches that. Try the code on the roll label, or a word like “oak”, “marble” or “white”.
04 Request a Cut
Send Your Cut List
Pattern codes, a length for each, and where it is going. Nothing is cut or charged from this form: a person replies with price, stock and delivery before anything happens.
Lead Time1 to 10 business daysCut and shipped in 1 to 2 days once confirmed, as bodaq.com states it.
Ordering and accounts live on bodaq.com.
Your Cut List Is Ready to Send
We could not send it automatically. Open it as an email to info@bodaq.com, or copy it into your own email.
05 Samples First
Screens Flatten Emboss and Shift Colour. See the Sample Before You Order the Length.
Designers, installers and anyone making the call on a renovation can request free samples of the patterns they are considering. Order the codes you are weighing up, hold them against the room, then send the cut list.
06 Need an Installer?
Cut Film, and Someone Who Knows How to Put It On
Bodaq film goes on dry, with a squeegee and heat, and most failures start in the surface underneath rather than in the film. The certified installer network lives on bodaq.net. Request an installer and it is flagged on your cut list request.
- Small jobs, your call. For small projects or DIY applications, installing it yourself is possible. For full room renovations or commercial projects, Bodaq strongly recommends a certified installer.
- Doing it yourself? Watch the installation tutorial on bodaq.com and read the substrate guides under Documents below.
Covering most main cities and states.
In Canada, installers and film come through nelcos.com.
07 Technical Basics
What You Are Buying by the Foot
Five layers, two tenths of a millimetre. The same film as a full roll, with the same figures, just less of it.
- 01Transparent Film
Clear protective top layer. Takes the day-to-day wear and cleaning and carries the surface sheen, from super-matt to high gloss.
- 02Printed Pattern Layer
Where the woodgrain, stone, fabric or solid colour lives. The emboss is registered to the print, so a grain you can see is a grain you can feel.
- 03Base Sheet
The PVC body of the film, 0.2 mm overall. This is what gives Bodaq the stretch to wrap a bullnose, a column or a curved front without a seam.
- 04Air-Channeled Adhesive Layer
Pressure-sensitive acrylic adhesive cut with a fine grid of channels, so trapped air escapes as the film is squeegeed down instead of blistering. Full strength in 3 to 7 days.
- 05Release Backing
The liner that keeps the adhesive clean until installation. Peeled back progressively as the film goes on.
- Material
- Self-adhesive PVC architectural filmPrinted and embossed. Made in the Republic of Korea
- Roll width
- 48 in (1,220 mm)
- Full roll length
- 164 ft standard131 ft or 98 ft on some collections
- Thickness
- 0.2 mm average (8 mil)
- Pattern direction
- Along the roll length
- Application
- Dry, hand-applied12 to 38 °C (54 to 100 °F)
- Adhesive
- Pressure-sensitive acrylic, air channelsFull strength in 3 to 7 days
- Storage
- 5 to 30 °C (41 to 86 °F)Upright, out of direct sun
- Fire rating
- ASTM E84 Class A
- Use
- InteriorOutdoors: the EXF exterior range only
- Warranty
- 10-year material warranty, per the bodaq.com FAQ
08 Documents
Data Sheets, Installation Guides and Care
The technical bulletin, the substrate guides and the care instructions for Bodaq interior film, as PDFs from bodaq.com.
09 FAQ
Questions About Buying Less Than a Roll
Answers from bodaq.com, plus where the rest of the Bodaq family fits in. Something missing? Ask it in the notes on your request.
Can I order part of a roll?
Yes. The minimum order quantity is 10 linear feet. This allows flexibility for small DIY projects or testing on specific surfaces before a full installation.
From the bodaq.com FAQ.
How long does a cut length take to arrive?
Material is cut and shipped in 1 to 2 days, with a lead time of 1 to 10 business days. The reply to your request confirms price, stock and delivery to your ZIP before anything is cut.
Lead time as bodaq.com states it.
How wide is a cut length?
Bodaq film comes on 48 in (1,220 mm) rolls, so every cut length is 48 in wide and as long as you order. The pattern runs along the length of the roll.
How can I request a sample?
If you are an interior designer, installer or decision-maker working on a renovation project, you can request free samples of the patterns you are considering: add them to your cut list and tick “Samples first” on your request.
Can I install Bodaq film myself?
For small projects or DIY applications, it is possible. However, for full room renovations or commercial projects, Bodaq strongly recommends hiring a Bodaq Certified Installer to ensure durability and warranty coverage.
What surfaces can Bodaq film wrap?
Bodaq adheres well to a wide range of surfaces, such as:
- Wood and MDF
- Painted drywall
- Metal
- Glass
- Laminate
- Plastic
Proper surface preparation is essential. Sanding and priming may be required for best adhesion.
Is Bodaq film self-adhesive?
Yes. Bodaq comes with a pre-applied, pressure-sensitive adhesive on the back. For optimal adhesion, especially on porous or uneven surfaces, Bodaq recommends Bodaq Primer, designed specifically for architectural vinyl.
Is Bodaq Interior Film fire-rated?
Yes. Bodaq Interior Film is certified Class A fire-rated. In high temperatures, the film melts gradually to prevent flame spread, making it safe for applications on kitchen cabinets, countertops, backsplashes and commercial settings.
Can I remove the film later?
Yes, Bodaq is removable, though it is designed for long-term use (10+ years).
- Easy to remove within the first hour of installation
- For older applications, removal may take 30 to 60 minutes for a standard 7 × 3 ft panel
- Alternatively, a new layer of film can be applied over the existing one for a refreshed look
Does Bodaq offer a warranty?
Yes. Bodaq offers a 10-year warranty on the film material. Read the warranty terms (PDF).
I need full rolls. Is this the right site?
For full rolls at trade pricing, bodaqusa.com is the wholesale site. It sells full rolls only; bodaq.us is where partial rolls are cut.
I am in Canada.
Canada is served by nelcos.com, out of Burnaby and Toronto: +1 778-766-2133 (BC) and +1 647-779-2133 (ON).
10 The Bodaq Family
If This Is Not the Right Door, Here Is the Right One
Bodaq runs separate sites for separate jobs, so each one can say plainly what it does and does not do.
The official Bodaq site by Hyundai L&C: every film, samples, the visualizer, ordering.
bodaq.com ↗ I Need Full RollsWholesale full rolls for the trade, with accounts and freight to all fifty states.
bodaqusa.com ↗ I Need It InstalledThe certified installer network and project management across multiple sites.
bodaq.net ↗ Run the Whole ProjectFilm supplied, installed and managed as one project, from first photo to sign-off.
bodaqfinishes.com ↗ I Am in Canada+1 778-766-2133 (BC) · +1 647-779-2133 (ON). Burnaby and Toronto.
nelcos.com ↗11 Contact
Questions Before You Order? Ask Us
Call, email or send a message about patterns, samples, lengths or installers. To order cut lengths, send your cut list with the request form: it carries the pattern codes and a length for each.
In Canada, contact nelcos.com: +1 778-766-2133 (BC) and +1 647-779-2133 (ON).
Your Message Is Ready to Send
We could not send it automatically. Open it as an email to info@bodaq.com, or copy it into your own email.